Multi Cyclone 16
The accumulation of sediment can be visibly monitored through the MultiCyclone’s clear sediment sump. It is cleaned by simply opening the purge valve. Only 15 litres of water is discharged to clean the unit of sediment. The MultiCyclone is ideal as a pre-filter to extend the life of your existing filter. The filtration efficiency of the MultiCyclone was tested by feeding 5 to 80 micron dust particles through the MultiCyclone and analyzing the percentage of dust particles trapped in the sediment bowl. The laboratory test revealed that the Multi Cyclone was effective in filtering particles sized 40 to 80 microns. The unit works together with a sand, cartridge, bead or DE filter to polish the water. It allows the installation of finer filtration systems, such as cartridge filters with finer cartridges and the sand filters with finer filter media. Finer filtration systems can be installed without the burden of extra maintenance. The water ends up clearer with less up keep. The unit is supplied with both 2”/63mm quick connect unions making this unit ideal for new installations and retrofit market. Minimum flow is 650 gallons per hour, max. flow is 6000 gallons per hour. Max. pressure is 4 bar. The MultiCyclone must be installed after the pump, either on top or using the stand.
2" inlet and outlet