| |
|
|
| |
 |
| |
| The MultiCyclone
is a filtration device that is
capable of saving water and reducing
filter maintenance. The MultiCyclone
works on the basis of centrifugal
water filtration. There are no
moving parts to wear and tear
and no filter media to clean or
replace. Incoming water is guided
by a diverter plate so that it
enters multiple hydro cyclones
tangentially, generating a strong
centrifugal effect. This spins
the sediment out to the hydro
cyclone’s wall and then
spirals it down to the sediment
sump, while the cleansed water
spirals upwards. The accumulation
of sediment can be visibly monitored
through the MultiCyclone’s
clear sediment sump. It is cleaned
by simply opening the purge valve.
Only 15 litres of water is discharged
to clean the unit of sediment.
The MultiCyclone is ideal as a
pre-filter to extend the life
of your existing filter. The filtration
efficiency of the MultiCyclone
was tested by feeding 5 to 80
micron dust particles through
the MultiCyclone and analyzing
the percentage of dust particles
trapped in the sediment bowl.
The laboratory test revealed that
the Multi Cyclone was effective
in filtering particles sized 40
to 80 microns. The unit works
together with a sand, cartridge,
bead or DE filter to polish the
water. It allows the installation
of finer filtration systems, such
as cartridge filters with finer
cartridges and the sand filters
with finer filter media. Finer
filtration systems can be installed
without the burden of extra maintenance.
The water ends up clearer with
less up keep. The unit is supplied
with both 2”/63mm quick
connect unions making this unit
ideal for new installations and
retrofit market. Minimum flow
is 650 gallons per hour, max.
flow is 6000 gallons per hour.
Max. pressure is 4 bar. The MultiCyclone
must be installed after the pump,
either on top or using the stand. |
| |
Our Price £249.95
Stand £39.95 |
| |
|
|
| |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
|
